Polymer Coatings Polymer Floor Primer Coating

A two-component Solvent-Based  Cementitious / Concrete Primer, compatible with both Epoxy and Polyurethane Top Coatings, and is a preparatory coating you apply to provide better adhesion by penetrating into the substrate for a better bond.

To be used as a Primer Coating on cementitious floors, cement or marbelite pool surfaces, where the substrate is extremely porous and dry.

https://wa.me/p/24310549571926186/27837225843

Product Properties:
• Easily applied by Mohair Roller / Epoxy Pile Roller, brush, spray and airless spray.
• Water resistant
• +/-125 Microns thick coating depending on penetration into substrate.
• Available in a clear colour.
• Technical Data:
I. Colour - Available in a Transparent Colour
II. Finish - Gloss Finish ( dependant on penetration )
III. Mixing Ratio - 11 :1 - Product : Hardener
IV. Activator - Part B—Hardener
V. Film Thickness - +- 75 to 125 microns thick per coat ( one coat normally required ) - applied by roller and dependant on penetration
VI. Coverage - 25 sqm per 5 lt pail( single coat )
VII. Application - Brush, Mohair Roller, Epoxy Pile Roller and Airless/Compresses Air Spray
VIII. Coats required - 1 x coat minimum required, unless surface is extremely porous, a 2nd coat may be applied.

Drying Information:
Wait 24 hours for the floor to dry, test the floor before you walk on it, cooler weather may take longer to dry.
• 24 Hours Touch dry at +/- 20˚C

Also available in a Water-Based variant.