Mapelastic Smart

MAPELASTIC SMART

https://wa.me/p/6881939828509910/27837225843

Two-component, high-flexibility cementitious mortar, applied by brush or by roller, for waterproofing concrete surfaces such as balconies, terraces, basins and swimming pools, and for protection against the penetration of aggressive agents.
Mapelastic Smart is used to form highly flexible, waterproof and protective dressings on concrete structures, even those subject to cracking.
Mapelastic Smart may also be used to cover up micro-cracking in concrete or render.
Mapelastic Smart is supplied in the form of two pre-dosed components, which must be mixed together without adding either water or any other ingredient.
Mixing ratio: A : B = 2 : 1.
The mortar is applied by brush, roller or spray-rendering machine on surfaces which must be perfectly clean and solid, and which have been dampened with water beforehand.
With Mapelastic Smart, a levelling layer of up to 2 mm thick may be applied in one single coat.
If the product is to be applied on surfaces which are highly stressed or which have micro-cracking, 4 x 4.5 mm Mapenet 150 must be inserted.
To further improve both elongation at failure and crack bridging of Mapelastic Smart, we recommend inserting Mapetex Sel, macro-holed non-woven polypropylene fabric.
Mapelastic Smart meets the requirements of EN 1504-2 standards, coating (C), in compliance with PI, MC and IR principles, for concrete protection.

Consumption
approximately 1.6 kg/m2 per mm of thickness, if applied by brush or roller;
approximately 2.2 kg/m2 per mm of thickness, if applied by spray.

Packaging
20 kg bags 10 kg drums.

Some application examples
• Waterproofing hydraulic channels, faces of dams
and basins.
• Waterproofing bathrooms, showers, balconies,
terraces, swimming pools etc. before laying ceramic
tiles.
• Waterproofing plasterboard, render or cementitious
surfaces, lightweight cement blocks and marine-grade
plywood.
• Flexible protection layer of new concrete structures
or repaired structures subject to minor deformation
under load.
• Protection of cementitious renders or concrete
with cracks due to shrinkage, minor movement
caused by thermal gradients or dynamic stresses
due to the passage of vehicles, against infiltration
of water and aggressive elements from the
atmosphere.
• Protection of concrete pillars and beams and road
and railway viaducts repaired with products from
the Mapegrout or Planitop ranges against the
penetration of carbon dioxide.
• Protection of structures with an inadequate layer of
concrete over the reinforcement rods against the
penetration of aggressive elements.
• Protection of concrete surfaces which may come into
contact with sea water, de-icing salts, such as sodium
or calcium chloride, and sulphates.
ADVANTAGES
• High performance: a 2 mm thick film can cover cracks
up to 2 mm wide.
• Excellent mechanical characteristics thanks to the
use of Mapetex Sel reinforcement.
• CE-certified product in compliance with EN 1504-2
and EN 14891.
• Excellent elongation at failure (120%).
• Fluid consistency for easy application.
• Resistant to UV rays.
• May also be applied on existing coverings.
• Compatible with ceramic, mosaic and natural
stone coverings.
• Product certified EC1 R Plus by the GEV
Institute (Gemeinschaft Emissions-kontrollierte
Verlegewerkstoffe, e.V.) as a product with very low
emission of volatile organic compounds.